null

Metal Tech Lexus GX460 Lancer Rear Swing Out Bumper (2010+)

$2,729.95 - $3,595.95
SKU:
MT-GX460-34210-OS
Availability:
Bumper comes RAW, please choose add-on powder coating if needed - SHIPS FOR $249
  • Description
  • Additional Information

Metal Tech 4x4 Lexus GX460 Lancer Swing Out Rear Bumper

*This bumper comes RAW. Please choose the additional powder coat add-on if you would like it to be painted. Minimum of 2 weeks processing time for the powder coating. Pictures show RAW and Powder Coated options - SHIPS for $249

Now shipping with new fuel can holders (Stage 3 Bumper) - full built vehicle pictures show previous design - see the new design HERE

*MT4x4 bumpers ship for a flat $249 to anywhere in the lower 48

Installation videos:  

Mounting your bumper

Swing arm install

Print instructions

 Stage 1 comes with:

  • Bumper shell
  • Swing out arm w/ tire carrier and license plate mount
  • Hi-Lift Jack mount
  • Antenna mount
  • Side Step Pockets for optional power ports and LED step lights
  • Stainless Steel latch with HDPE landing pads
  • All mounting hardware
  • Rear pockets for optional LED back up lights
  • Weight 165lbs 

Stage 2 comes with :

  • Bumper shell
  • Swing out arm w/ tire carrier and license plate mount
  • Hi-Lift Jack mount
  • Antenna mount
  • Side Step Pockets for optional power ports and LED step lights
  • Stainless Steel latch with HDPE landing pads
  • All mounting hardware
  • Rear pockets for optional LED back up lights
  • + 2 OPOR Flange Mount Reverse LED Lights
  • Weight 169lbs

 Stage 3 comes with:

  • Bumper shell
  • Swing out arm w/ tire carrier and license plate mount
  • Hi-Lift Jack mount
  • Antenna mount
  • Side Step Pockets for optional power ports and LED step lights
  • Stainless Steel latch with HDPE landing pads
  • All mounting hardware
  • Rear pockets for optional LED back up lights
  • + 2 OPOR Flange Mount Reverse LED Lights
  • + 2 Metal Tech Locking Steel Fuel/Water Can Holders and utility rack(s)
  • Weight 203lbs

Optional Accessories:

Estimated Install Time: 7 hours

GX460 Rock Slider Information:

GX460 Rock Sliders (SKU# OPOR-GX460-21000)

 

| HOW TO PAINT RAW SLIDERS Install Guide |

 

The Lexus GX460 Lancer rear bumper is a proven overland platform known around the world as a Land Cruiser Prado 150. We designed, engineered, and tested the Lancer rear swing out bumper to give you added utility and protection needed while using serviceable and replaceable moving parts so the bumper keeps performing the life of the product.   

The Lexus GX460 Lancer rear bumper uses our custom machined 2000lb Motion X Pivot System with two tapered radial bearings and grease seal that move the swing out arm with ease, even when fully loaded with accessories.  The swing out is assisted by an integrated 120lb gas strut, auto locking in the open and closed positions to make opening while the vehicle is off axis safe and easy.

  
The swing out beam features an adjustable and lockable offset spare tire mount holding up to a 35" spare without blocking the tail lights and a license plate mount. There is a built in horizontal Hi-Lift Jack mount located low on the swing arm beam and a UHF/CB antenna mounting point up high. The swing arm is secured in place with a stainless steel 2000lb rated locking latch resting on machined High-density polyethylene (HDPE) replaceable wear blocks for the swing arm contact points into the locking cradle preventing metal on metal wear and rattling on the trail, and a long service life.
 
We integrated 3/4" recovery points in line with the chassis for strong and reliable rigging in recovery situations. The bumper shell features rear facing cut outs for optional 20w flange mount LED backup lights helping illuminate the trail while reversing. There are two laser cut side step pockets on both sides of the bumper to make roof cargo access easier. The step pockets have cut outs for optional 12v marine grade power ports and LED step lights. We also designed this rear swing out bumper to work with the factory Lexus back up sensors for added convenience.
 
We offer an optional bolt on receiver hitch under frame mount for full GVW towing capacity.
 
 

Disclaimer:  Stage 3 Bumper shown

Blind Spot monitoring system on most instances is not compatible w/o adjusting the sensors.  The sensors can be adjusted in their mounting to allow the blind spot monitoring to work with the bumper. However Toyota/Lexus did make this system something you can turn on or off at the "control" screen on the dash as the driver. 

Make:
Lexus
Model:
GX460
Year:
2010
Year:
2011
Year:
2012
Year:
2013
Year:
2014
Year:
2015
Year:
2016
Year:
2017
Year:
2018
Year:
2019

Videos Hide Videos Show Videos

Military First Responders Medical Teachers

SPECIAL DISCOUNTS

Metal-Tech 4x4 supports the heroes among us click for more info


All prices are in USD. ©2024 Metal Tech 4x4 | Sitemap | Website: Northwest Web Development