Metal Tech FZJ80 1.5" Front spacer plates Pair, w/ hardware

Metal Tech 4x4 80 Series Land Cruiser 1.5" Front Spacer Plates

Two completely welded spacer plates for your front springs. These start as two CNC laser cut 1/4" thick plates, then a center section is welded between the two. We weld the top bolts in place to aid in installation, and include washers and nylock nuts for mounting.

Finish: Ships as raw metal. We highly suggest sealing/painting them before installing.

These spacers come as a pair and are available in spacing as 1.5" and 2.0". This listing is for 1.5".

Why These Spacers

We originally made these spacers for the company's orange FZJ80. We are currently running the Old Man Emu J lift, and the spacers level the front perfectly. We have had a number of people ask us to make these a production item; here they are. No more cracked out, falling-apart rubber spacers!

The key point is that we are lowering the spring mounting point, including the OEM center cone, so that the cone is still in place to do its job as you near full compression.  

Notes

• Caster correction required: As with any spacers used on the front end, you will need to adjust your caster to keep it to factory specs when using this product.

What's Included

• (2) Fully welded front spacer plates (pair)
• Hardware kit: washers and nylock nuts
• Top bolts are pre-welded into the spacers for easier installation

Estimated Install Time

Approximately 1.5 hours

Install Guide

PDF download here, 

Fitment

FZJ80 1.5" Pair spacer plates w/ hardware fits the following vehicle(s):

• 1993-1997 Toyota FZJ80 Land Cruiser
• 1996-1997 Lexus LX450