null

Metal Tech 2003-09 GX470 Pegasus Rear Swing Out Bumper

$2,534.95 - $3,395.95
SKU:
MT-GX470-34210-OS
Availability:
Bumper comes RAW, please choose add-on powder coating if needed - SHIPS FOR $249
  • Description
  • Additional Information

Metal-Tech 4x4 Lexus GX470 Pegasus Rear Swing Out Bumper

This bumper comes RAW. Please choose the additional powder coat add-on if you would like it to be painted. Minimum of 2 weeks processing time for the powder coating. Pictures show RAW and Powder Coated options

Now shipping with new fuel can holders (Stage 3 Bumper) - full built vehicle pictures show previous design - see the new design HERE

*MT4x4 bumpers ship for a flat $249 to anywhere in the lower 48

Installation videos:  

Mounting your bumper

Swing arm install

Print instructions 

Stage 1 comes with:  

  • Bumper shell
  • Swing out arm w/ tire carrier and license plate mount (tire carrier stinger come powder coated automatically)
  • Hi-Lift Jack mount
  • Antenna mount
  • Side Step Pockets for optional power ports and LED step lights
  • Stainless Steel latch with HDPE landing pads
  • All mounting hardware
  • Rear pockets for optional LED back up lights
  • Stage 1 Bumper Additional Vehicle Weight: 150LBS

Stages 2 comes with:

  • Bumper shell
  • Swing out arm w/ tire carrier and license plate mount
  • Hi-Lift Jack mount
  • Antenna mount
  • Side Step Pockets for optional power ports and LED step lights
  • Stainless Steel latch with HDPE landing pads
  • All mounting hardware  
  • Rear pockets for optional LED back up lights
  • + 2 OPOR Flange Mount back up LED Lights
  • Stage 2 Bumper Additional Vehicle Weight: 155LBS

Stage 3 comes with:

  • Bumper shell
  • Swing out arm w/ tire carrier and license plate mount
  • Hi-Lift Jack mount
  • Antenna mount
  • Side Step Pockets for optional power ports and LED step lights
  • Stainless Steel latch with HDPE landing pads
  • All mounting hardware
  • Rear pockets for optional LED back up lights
  • + 2 OPOR Flange Mount back up LED Lights
  • + 2 Metal Tech Steel Locking Fuel/Water Can Holders (This item comes powder coated automatically)
  • Stage 3 Bumper Additional Vehicle Weight: 184LBS

 

Optional Accessories:

  • Metal-Tech Standard Receiver (SKU #MT-34217)
  • Metal-Tech GX470 Backup Camera Mount Relocation Kit (SKU #MT-53210)
  • OPOR Rear License Plate LED Lights (SKU #OPOR-LED-LP)
  • OPOR 12v Dual Plugs for step pockets (SKU #OPOR-54213)
  • OPOR LED Step Lights for step pockets (SKU #OPOR-54812)

Estimated Install Time: 7 hours

ADDITIONAL INFO ABOUT OUR SLIDERS

Raw Sliders (SKU# OPOR-GX470-22000)

Powder Sliders (SKU #OPOR-GX470-22200)

| HOW TO PAINT RAW SLIDERS | Install Guide |

Pegasus is a one piece no cut rear bumper with integrated 3/4" pull points and built in rear facing pockets for 20w flange mount LED backup lights. It uses MT4x4's custom machined 2000lbs Motion X Pivot System with two tapered radial bearings and grease seal that moves the one piece swing out arm with ease.

All Lexus GX470 rear swing out bumpers include a stainless steel 2000lbs rated locking latch bolted on with machined High-density polyethylene (HDPE) replaceable wear blocks for the beams contact points into the locking cradle. The swing out beam features an adjustable offset spare tire mount holding up to a 35" spare without blocking the tail lights,  a UHF/CB antenna mounting point, and a built in horizontal Hi-Lift Jack mount as standard.

We use state of the art design and engineering tools like 3D Scanning and Finite Element Analysis (FEA) to develop all of our bumpers.  We analyze the products real-world physical behavior by virtually testing the CAD models against linear, non-linear, and dynamic loading, allowing us to raise product quality and product durability ensuring a long service life.

The Pegasus is a rear bumper swing away tire carrier that uses an integrated 120lbs gas strut to assist in opening the swing out beam loaded with auto locking open and closed positions. As a result, the swing arm can be opened safely when the vehicle is off axis.

On the side of this Lexus GX470 rear swing out bumper we built in side steps pockets to provide quick access to your roof. Each step pocket features optional mounting points for marine 12v accessories ports and an LED step light that will illuminate the step pocket, both available as an optional accessory.

We offer an optional bolt on receiver hitch,  shown under frame mount full GVW towing capacity 

If your GX470 has a back up camera then you will need our optional Backup Camera Mount Relocation Kit to relocate the factory camera to the spare tire carrier. 

The Lexus GX470 rear swing out bumper is designed so all moving parts are fully serviceable, rebuildable, and replaceable, which ensures a long service life for the product. 

Make:
Lexus
Model:
GX470
Year:
2003
Year:
2004
Year:
2005
Year:
2006
Year:
2007
Year:
2008
Year:
2009

Videos Hide Videos Show Videos

Military First Responders Medical Teachers

SPECIAL DISCOUNTS

Metal-Tech 4x4 supports the heroes among us click for more info


All prices are in USD. ©2024 Metal Tech 4x4 | Sitemap | Website: Northwest Web Development