Metal Tech High Tuck Rear Receiver
|Expected back in stock Nov 15th 2020|
The High Tuck Receiver is designed for use with Metal-tech 4x4 rear bumpers. Made to bolt up as cleanly as possible maximizing rear departure angle with the bottom sitting flush with the bumper shell while still maintaining a functional receiver.
A part of the design getting this to sit up high results in limited space for the hitch you are attaching and because of that the distance from the back of the 2x2 receiver forward to the hole for the pin lock is only 1-1/4 inches. You may need to modify and cut short some receiver hitch stingers to have the lock pin location fit correctly.
This receiver bolts to the bumper frame as a stock receiver would, using 4 rear mounting holes and 2 under the rear frame crossmember for secure structural support. The High Tuck Receiver works great with accessory racks, bike racks, and provides a good centered recovery point. The receiver opening depth is shallow and bottoms out at the rear crossmember of the frame. We designed the High Tuck Receiver depth to work with the industry standard Factor 55 Hitch Link 2.0 recovery point.
NOTE: Some receiver accessories may not fit due to the shallow depth of this receiver.
- High departure angle
- Strong compact design
- 2" receiver size
- Powder coated black
- Mounting hardware included
Estimated Install Time: .5 hours